Saturday, 15 November 2014

Automatic Water Level Controller Cum Indicater



The offered Automatic Water Level Controller 
 In current scenario mostly High rise buildings Housing complexes and societies have a requirement for storage and pumping of water. Where raw water is drawn from ground, after that it goes through softener and at last boosting to overhead tanks. It requires WATER AUTOMATION for Hotels, Restaurants, Dairies, Municipal corporations and Industrial users, it is important for consultants and architects to design water supply and disposal in such a way as to ensure that the users never have to worry about handling pumps and checking levels as a routine.
 Since water invariably corrodes most equipment, we supply equipment which is NOT AFFECTED by water corrosion means NO MAINTENANCE, NO RUNNING COST it is in plastic sealed container called imported sensors and also provide completely stainless steel solution of Pumps with dry run protection.
Fully automatic, provided controller does not need an operator to perform its operations. Furthermore, proposed controller stops the motor when tank becomes full and restarts it when water level goes down in the water tank. With rich industry experience and knowledge, we are offering this Automatic Water Level Controller in plethora of designs and other specifications at nominal rate.








Features:

  • Optimum efficiency
  • Compact design
  • Less power consumption
  • Longer functional life
Specifications:
  • Starts motor when over head tank remains half: In boaring water condition, in supply water condition starts motor only and only if supply water is coming
  • Stop motor when tank becomes full
  • You can run motor manually either water is not coming or tank is in full condition

Thursday, 16 October 2014

Water Tank Laval display

COMING SOON -:

Here is a simple, versatile project which indicates the level of water and automatically controls it by using PIC 16f676 Microcontroller. The Water Level Sensing Section senses the level of water in the tank
and sends it to the Receiver Section.
Receiver Section is connected to the
Controlling Section, which process the received information and produces visual, sound indications and controls the operation of the motor whenever required.

For more details cont on
Shivendrakumarsahu@gmail.com

Solar Charger controller

Coming soon

7 Step Automatic Stabilizer controller card

A voltage stabilizer is a device which stabilizes the AC voltage and keeps it between 200V to 245V AC. 
Sometimes a variation of voltage or spikes appear on an AC line, if we use a voltage stabilizer then the extra high voltages or 
low voltages can cause no problem to the appliances. It protects any electronic device connected to it from getting damaged. 
Automatic voltage stabilizer is very good example of power electronics projects.
Different varieties of voltage stabilizers are present in the market. But we can also make them at home according to our needs and 
requirements.
voltage stabilizer important points
Before building this controller card, the following points and specifications should be kept in mind so that the device we build 
can work properly and give us/you the desired results:

The main feature of our stabilizer is that it can perform for range of input voltage that vary from 60V to 310V, 90V to 440V & 140V to 500V.


The range of output voltage will be maintained 200V to 240V and further it can be customised as per your/customer requirments.

There should be no change in the waveform or the frequency of input/output voltages.

A total of 5 relays are used in the circuit and its auto transformer has 5 or 6 additional tappings 
Automatic voltage stabilizer working

The microcontroller generates the control signals and five relays are used with the autotransformer for the control and conversion of 
voltage. The input voltage is sensed by the microcontroller and it tries to keeps the output voltage between its specified ranges, by 
switching the relays. Out of the five relays, two of them switch the connection between the tappings 5 or 6 , one switches the output 
connection between the tappings 215 and 240 while the last one is a master on/off relay which disconnects the output in case of low 
and high cut modes. Relay interfacing with micro-controller is very easy.

This is the photo of circuit which is currently running in market on my source codes , Micro controller used in this circuit can be changed as per your requirment.



For more information or any query please   Mail Me .

5Step Automatic stabilizer controlled card

Coming soon

AC Voltmeter & CURRENT Meter

Coming soon

DC Voltmeter & CURRENT meter

Coming soon